How To Make A Robot Costume Yourself

Table of contents:

How To Make A Robot Costume Yourself
How To Make A Robot Costume Yourself

Video: How To Make A Robot Costume Yourself

Video: How To Make A Robot Costume Yourself
Video: How To Build Your Own Wearable Robot? 2024, November
Anonim

Have you decided to play a game based on a fantastic work? Then you definitely cannot do without a robot suit. It is also suitable for the New Year. Or you can arrange, for example, a flash mob, everyone can dress up in robots' costumes and just walk around the city.

Decorate the robot head with buttons and levers
Decorate the robot head with buttons and levers

It is necessary

  • 2 packing boxes
  • Foil
  • Colored paper
  • Piece of wire
  • Universal adhesive
  • Brush
  • Scissors
  • Knife
  • Pencil
  • Ruler
  • Awl
  • Scotch

Instructions

Step 1

Start making the costume from the head. Take a small cardboard box. Cut off the unnecessary parts of the box, you should get a cube without one side. On the side that will represent the face, draw the shape of the cutout. The cut can be square, rectangular, round. You can just make holes for the eyes, they should be large enough for the suit to be comfortable. Cut a hole. Cover the box with foil. Decorate the front. There you can make, for example, a series of buttons and levers. They do not have to be arranged symmetrically - robots are different.

Step 2

Attach antennas to the head. Puncture 2 holes in the upper part of the head with an awl at a distance of 3-4 cm from each other. Bend the wire so that you get 2 identical antennas and the gap between them is equal to the distance between the holes. Insert the wire. Attach tape to the inside of the box. The holes on top can be covered with gray plasticine. Attach the foam sponge tips to the antenna antennae. Cut them to shape, coat with glue and put on the wire.

Step 3

Take the box designed for the torso. In the same way as on the "head", cut off the excess parts. You should have a tall cardboard box, also without the bottom edge. Mark and cut a round hole at the top edge. Find the center by drawing the diagonals. The circle should be of such a size that the head passes freely, but at the same time it is kept on the shoulders.

Step 4

Cut openings for the arms. They can be made round by placing them closer to the top edge. But you can make quite wide slots, starting from the bottom of the side edges. Cover the torso with foil. Before decorate with different buttons and levers.

Step 5

Basically, the costume is ready. But you can improve it by making legs as well. To do this, you will need old sneakers, flip-flops, or shoes without laces. You need shoes that you can wear freely and not suffer with lacing or fasteners. Find two long and narrow boxes. As a rule, such boxes are closed on a narrow and long edge. It needs to be glued, and both small sides must be cut off. Cover the box with foil. Sew shoes to the bottom of the “leg”. And - forward to the carnival!

Recommended: