How To Tie A Ribbon

Table of contents:

How To Tie A Ribbon
How To Tie A Ribbon

Video: How To Tie A Ribbon

Video: How To Tie A Ribbon
Video: How to Tie the Perfect Bow 2024, November
Anonim

In order to decorate a gift beautifully, you need to wrap it up or put it in a beautiful package. Something is still missing. And what is missing is a beautiful ribbon bow.

Not is complete without beautiful packaging with a bow
Not is complete without beautiful packaging with a bow

Instructions

Step 1

Long tiered bow.

To create it, you need to take three pieces of tape different in color and width. Cut them so that the widest section of the tape is the longest, while the narrow one should be the shortest. Form the ends of the bow. And then tie the folded pieces together with another piece of tape. Remember to leave the long ends to secure the tiered bow to the gift wrapping.

Step 2

A two-color bow is tied like this: take two ribbons of different colors (one narrower and one wider). First form a loop of a wide ribbon, fastening the ends with glue. Now do the same with the second ribbon overlaid on the first. Iron the resulting "sandwich" of ribbons with your hands and fix it with a paper clip or glue from the inside. In its final form, the bow is formed with a third ribbon, which must be long enough to tie it to the gift box.

Step 3

Bow flower.

The first stage in its formation is the usual ribbon ring, which should be held with the index and thumb. Repeat this movement several times until you have ten or more of these rings in your hand. The larger bow you want the rings you need. Tie the rings in the middle with a long and narrow ribbon, straighten the loops alternately. The stunning flower bow is ready.

Step 4

Bow "Dior".

Glue several rings of ribbons of different lengths and use a stapler or glue to connect them together. The bow is half finished. Place it on a base, which is a tape with cut-out ends. Now mask the paperclip with a small piece of tape, gluing the ends from the inside of the bow.

Step 5

Bow chrysanthemum.

You will need a piece of sturdy tape, scissors, and wire. Take a few ribbons, cut approximately in the middle and fasten them with wire at the notch points. Now it's time to give them the look of curly chrysanthemum petals. Make even cuts on the stitches that are folded together and begin to straighten the petals, turning the stitches to the right and left. Start with the inner loops on one side of the bow, then work over to the other side.

Recommended: